# IMPORTANT # C:/Program Files/EasyPHP-12.1 is used to specify EasyPHP installation path # # This is the main Apache HTTP server configuration file. It contains the # configuration directives that give the server its instructions. # See for detailed information. # In particular, see # # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "logs/access_log" # with ServerRoot set to "C:/Program Files/EasyPHP-12.1/apache" will be interpreted by the # server as "C:/Program Files/EasyPHP-12.1/apache/logs/access_log", whereas "/logs/access_log" # will be interpreted as '/logs/access_log'. # # NOTE: Where filenames are specified, you must use forward slashes # instead of backslashes (e.g., "c:/apache" instead of "c:\apache"). # If a drive letter is omitted, the drive on which httpd.exe is located # will be used by default. It is recommended that you always supply # an explicit drive letter in absolute paths to avoid confusion. # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do not add a slash at the end of the directory path. If you point # ServerRoot at a non-local disk, be sure to specify a local disk on the # Mutex directive, if file-based mutexes are used. If you wish to share the # same ServerRoot for multiple httpd daemons, you will need to change at # least PidFile. # ServerRoot "C:/Program Files/EasyPHP-12.1/apache" # # Mutex: Allows you to set the mutex mechanism and mutex file directory # for individual mutexes, or change the global defaults # # Uncomment and change the directory if mutexes are file-based and the default # mutex file directory is not on a local disk or is not appropriate for some # other reason. # # Mutex default:logs # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 12.34.56.78:80 Listen 127.0.0.1:8887 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # LoadModule access_compat_module modules/mod_access_compat.so LoadModule actions_module modules/mod_actions.so LoadModule alias_module modules/mod_alias.so LoadModule allowmethods_module modules/mod_allowmethods.so LoadModule asis_module modules/mod_asis.so LoadModule auth_basic_module modules/mod_auth_basic.so #LoadModule auth_digest_module modules/mod_auth_digest.so #LoadModule authn_anon_module modules/mod_authn_anon.so LoadModule authn_core_module modules/mod_authn_core.so #LoadModule authn_dbd_module modules/mod_authn_dbd.so #LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_file_module modules/mod_authn_file.so #LoadModule authn_socache_module modules/mod_authn_socache.so #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so LoadModule authz_core_module modules/mod_authz_core.so #LoadModule authz_dbd_module modules/mod_authz_dbd.so #LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_host_module modules/mod_authz_host.so #LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule autoindex_module modules/mod_autoindex.so #LoadModule buffer_module modules/mod_buffer.so #LoadModule cache_module modules/mod_cache.so #LoadModule cache_disk_module modules/mod_cache_disk.so #LoadModule cern_meta_module modules/mod_cern_meta.so LoadModule cgi_module modules/mod_cgi.so #LoadModule charset_lite_module modules/mod_charset_lite.so #LoadModule data_module modules/mod_data.so #LoadModule dav_module modules/mod_dav.so #LoadModule dav_fs_module modules/mod_dav_fs.so #LoadModule dav_lock_module modules/mod_dav_lock.so #LoadModule dbd_module modules/mod_dbd.so #LoadModule deflate_module modules/mod_deflate.so LoadModule dir_module modules/mod_dir.so #LoadModule dumpio_module modules/mod_dumpio.so LoadModule env_module modules/mod_env.so #LoadModule expires_module modules/mod_expires.so #LoadModule ext_filter_module modules/mod_ext_filter.so #LoadModule file_cache_module modules/mod_file_cache.so #LoadModule filter_module modules/mod_filter.so #LoadModule headers_module modules/mod_headers.so #LoadModule heartbeat_module modules/mod_heartbeat.so #LoadModule heartmonitor_module modules/mod_heartmonitor.so #LoadModule ident_module modules/mod_ident.so #LoadModule imagemap_module modules/mod_imagemap.so LoadModule include_module modules/mod_include.so #LoadModule info_module modules/mod_info.so LoadModule isapi_module modules/mod_isapi.so #LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so #LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so #LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so #LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so #LoadModule ldap_module modules/mod_ldap.so #LoadModule logio_module modules/mod_logio.so LoadModule log_config_module modules/mod_log_config.so #LoadModule log_debug_module modules/mod_log_debug.so #LoadModule log_forensic_module modules/mod_log_forensic.so #LoadModule lua_module modules/mod_lua.so LoadModule mime_module modules/mod_mime.so #LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule negotiation_module modules/mod_negotiation.so #LoadModule proxy_module modules/mod_proxy.so #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule proxy_connect_module modules/mod_proxy_connect.so #LoadModule proxy_express_module modules/mod_proxy_express.so #LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule proxy_html_module modules/mod_proxy_html.so #LoadModule proxy_http_module modules/mod_proxy_http.so #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so #LoadModule ratelimit_module modules/mod_ratelimit.so #LoadModule reflector_module modules/mod_reflector.so #LoadModule remoteip_module modules/mod_remoteip.so #LoadModule request_module modules/mod_request.so #LoadModule reqtimeout_module modules/mod_reqtimeout.so LoadModule rewrite_module modules/mod_rewrite.so #LoadModule sed_module modules/mod_sed.so #LoadModule session_module modules/mod_session.so #LoadModule session_cookie_module modules/mod_session_cookie.so #LoadModule session_crypto_module modules/mod_session_crypto.so #LoadModule session_dbd_module modules/mod_session_dbd.so LoadModule setenvif_module modules/mod_setenvif.so #LoadModule slotmem_plain_module modules/mod_slotmem_plain.so #LoadModule slotmem_shm_module modules/mod_slotmem_shm.so #LoadModule socache_dbm_module modules/mod_socache_dbm.so #LoadModule socache_memcache_module modules/mod_socache_memcache.so #LoadModule socache_shmcb_module modules/mod_socache_shmcb.so #LoadModule speling_module modules/mod_speling.so #LoadModule ssl_module modules/mod_ssl.so #LoadModule status_module modules/mod_status.so #LoadModule substitute_module modules/mod_substitute.so #LoadModule unique_id_module modules/mod_unique_id.so #LoadModule userdir_module modules/mod_userdir.so #LoadModule usertrack_module modules/mod_usertrack.so #LoadModule version_module modules/mod_version.so #LoadModule vhost_alias_module modules/mod_vhost_alias.so #LoadModule watchdog_module modules/mod_watchdog.so #LoadModule xml2enc_module modules/mod_xml2enc.so LoadModule php5_module "C:/Program Files/EasyPHP-12.1/php/php546x140119180138/php5apache2_4.dll" PHPIniDir "C:/Program Files/EasyPHP-12.1/apache" SetEnv TMP "C:/Program Files/EasyPHP-12.1/tmp" # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd, as with most system services. # User daemon Group daemon # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # definition. These values also provide defaults for # any containers you may define later in the file. # # All of these directives may appear inside containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. admin@your-domain.com # ServerAdmin admin@127.0.0.1 # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # ServerName 127.0.0.1:8887 # # Deny access to the entirety of your server's filesystem. You must # explicitly permit access to web content directories in other # blocks below. # AllowOverride none Require all denied # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "C:/Program Files/EasyPHP-12.1/www" # This should be changed to whatever you set DocumentRoot to. # ====================================================== # !!! DO NOT CHANGE THIS LINE AND THE FOLLOWING ONES !!! # DocumentRootDirectory # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.4/mod/core.html#options # for more information. # Options Indexes FollowSymLinks # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOverride All # # Controls who can get stuff from this server. # Require all granted # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # DirectoryIndex index.html index.shtml index.wml index.pwml index.php index.php3 index.php4 index.php5 # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # Require all denied # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a # container, that host's errors will be logged there and not here. # ErrorLog "logs/error.log" # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a # container, they will be logged here. Contrariwise, if you *do* # define per- access logfiles, transactions will be # logged therein and *not* in this file. # CustomLog "logs/access.log" common # # If you prefer a logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # #CustomLog "logs/access.log" combined # # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo http://127.0.0.1/bar # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path Alias /images_easyphp "C:/Program Files/EasyPHP-12.1/home/images_easyphp" Alias /home "C:/Program Files/EasyPHP-12.1/home" Alias /modules "C:/Program Files/EasyPHP-12.1/modules" # # If you include a trailing / on /webpath then the server will # require it to be present in the URL. You will also likely # need to provide a section to allow access to # the filesystem path. Options Indexes MultiViews AllowOverride None Order deny,allow Allow from 127.0.0.1 Deny from all Require all granted Options FollowSymLinks Indexes AllowOverride None Order deny,allow Allow from 127.0.0.1 Deny from all Require all granted Options FollowSymLinks Indexes AllowOverride All Order deny,allow Allow from 127.0.0.1 Deny from all Require all granted # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the target directory are treated as applications and # run by the server when requested rather than as documents sent to the # client. The same rules about trailing "/" apply to ScriptAlias # directives as to Alias. # ScriptAlias /cgi-bin/ "C:/Program Files/EasyPHP-12.1/apache/cgi-bin/" # # ScriptSock: On threaded servers, designate the path to the UNIX # socket used to communicate with the CGI daemon of mod_cgid. # #Scriptsock logs/cgisock # # "C:/Program Files/EasyPHP-12.1/apache/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # AllowOverride None Options None Require all granted # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig conf/mime.types # # AddType allows you to add to or override the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz AddType application/x-tar .tgz AddType image/x-icon .ico AddType application/vnd.wap.wmlc .wmlc AddType application/x-httpd-php .phtml .pwml .php5 .php4 .php3 .php2 .php .inc AddType text/vnd.wap.wml .wml AddType text/vnd.wap.wmlscript .wmls AddType text/vnd.wap.wmlscriptc .wmlsc AddType image/vnd.wap.wbmp .wbmp # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi # For type maps (negotiated resources): #AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # #AddType text/html .shtml #AddOutputFilter INCLUDES .shtml # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # #MIMEMagicFile conf/magic # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://127.0.0.1/subscription_info.html # # # MaxRanges: Maximum number of Ranges in a request before # returning the entire resource, or one of the special # values 'default', 'none' or 'unlimited'. # Default setting is to accept 200 Ranges. #MaxRanges unlimited # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall may be used to deliver # files. This usually improves server performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # Defaults: EnableMMAP On, EnableSendfile Off # #EnableMMAP off #EnableSendfile on # ============================================================================ # Multi-language error messages # Source : conf/extra/httpd-multilang-errordoc.conf # ============================================================================ # # The configuration below implements multi-language error documents through # content-negotiation. # # Required modules: mod_alias, mod_authz_core, mod_authz_host, # mod_include, mod_negotiation # # We use Alias to redirect any /error/HTTP_.html.var response to # our collection of by-error message multi-language collections. We use # includes to substitute the appropriate text. # # You can modify the messages' appearance without changing any of the # default HTTP_.html.var files by adding the line: # # Alias /error/include/ "/your/include/path/" # # which allows you to create your own set of files by starting with the # C:/Program Files/EasyPHP-12.1/apache/error/include/ files and copying them to /your/include/path/, # even on a per-VirtualHost basis. The default include files will display # your Apache version number and your ServerAdmin email address regardless # of the setting of ServerSignature. Alias /error/ "C:/Program Files/EasyPHP-12.1/apache/error/" AllowOverride None Options IncludesNoExec AddOutputFilter Includes html AddHandler type-map var Require all granted LanguagePriority en cs de es fr it ja ko nl pl pt-br ro sv tr ForceLanguagePriority Prefer Fallback ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var ErrorDocument 410 /error/HTTP_GONE.html.var ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var # ============================================================================ # ============================================================================ # Fancy directory listings # Source : conf/extra/httpd-autoindex.conf # ============================================================================ # # Directives controlling the display of server-generated directory listings. # # Required modules: mod_authz_core, mod_authz_host, # mod_autoindex, mod_alias # # To see the listing of a directory, the Options directive for the # directory must include "Indexes", and the directory must not contain # a file matching those listed in the DirectoryIndex directive. # # # IndexOptions: Controls the appearance of server-generated directory # listings. # IndexOptions FancyIndexing HTMLTable VersionSort # We include the /icons/ alias for FancyIndexed directory listings. If # you do not use FancyIndexing, you may comment this out. # Alias /icons/ "C:/Program Files/EasyPHP-12.1/apache/icons/" Options Indexes MultiViews AllowOverride None Require all granted # # AddIcon* directives tell the server which icon to show for different # files or filename extensions. These are only displayed for # FancyIndexed directories. # AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip AddIconByType (TXT,/icons/text.gif) text/* AddIconByType (IMG,/icons/image2.gif) image/* AddIconByType (SND,/icons/sound2.gif) audio/* AddIconByType (VID,/icons/movie.gif) video/* AddIcon /icons/binary.gif .bin .exe AddIcon /icons/binhex.gif .hqx AddIcon /icons/tar.gif .tar AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip AddIcon /icons/a.gif .ps .ai .eps AddIcon /icons/layout.gif .html .shtml .htm .pdf AddIcon /icons/text.gif .txt AddIcon /icons/c.gif .c AddIcon /icons/p.gif .pl .py AddIcon /icons/f.gif .for AddIcon /icons/dvi.gif .dvi AddIcon /icons/uuencoded.gif .uu AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl AddIcon /icons/tex.gif .tex AddIcon /icons/bomb.gif core AddIcon /icons/back.gif .. AddIcon /icons/hand.right.gif README AddIcon /icons/folder.gif ^^DIRECTORY^^ AddIcon /icons/blank.gif ^^BLANKICON^^ # # DefaultIcon is which icon to show for files which do not have an icon # explicitly set. # DefaultIcon /icons/unknown.gif # # AddDescription allows you to place a short description after a file in # server-generated indexes. These are only displayed for FancyIndexed # directories. # Format: AddDescription "description" filename # AddDescription "GZIP compressed document" .gz AddDescription "tar archive" .tar AddDescription "GZIP compressed tar archive" .tgz # # ReadmeName is the name of the README file the server will look for by # default, and append to directory listings. # # HeaderName is the name of a file which should be prepended to # directory indexes. ReadmeName /icons/FancyIndexing/readme.html HeaderName /icons/FancyIndexing/header.html # # IndexIgnore is a set of filenames which directory indexing should ignore # and not include in the listing. Shell-style wildcarding is permitted. # IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t # ============================================================================ # ============================================================================ # Distributed authoring and versioning (WebDAV) # Source : conf/extra/httpd-dav.conf # ============================================================================ # # # # Required modules: mod_alias, mod_auth_digest, mod_authn_core, mod_authn_file, # # mod_authz_core, mod_authz_user, mod_dav, mod_dav_fs, # # mod_setenvif # # # The following example gives DAV write access to a directory called # # "uploads" under the ServerRoot directory. # # # # The User/Group specified in httpd.conf needs to have write permissions # # on the directory where the DavLockDB is placed and on any directory where # # "Dav On" is specified. # # DavLockDB "C:/Program Files/EasyPHP-12.1/apache/var/DavLock" # # Alias /uploads "C:/Program Files/EasyPHP-12.1/apache/uploads" # # # Dav On # # AuthType Digest # AuthName DAV-upload # # You can use the htdigest program to create the password database: # # htdigest -c "C:/Program Files/EasyPHP-12.1/apache/user.passwd" DAV-upload admin # AuthUserFile "C:/Program Files/EasyPHP-12.1/apache/user.passwd" # AuthDigestProvider file # # # Allow universal read-access, but writes are restricted # # to the admin user. # # Require method GET POST OPTIONS # Require user admin # # # # # # # The following directives disable redirects on non-GET requests for # # a directory that does not include the trailing slash. This fixes a # # problem with several clients that do not appropriately handle # # redirects for folders with DAV methods. # # # BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully # BrowserMatch "MS FrontPage" redirect-carefully # BrowserMatch "^WebDrive" redirect-carefully # BrowserMatch "^WebDAVFS/1.[01234]" redirect-carefully # BrowserMatch "^gnome-vfs/1.0" redirect-carefully # BrowserMatch "^XML Spy" redirect-carefully # BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully # BrowserMatch " Konqueror/4" redirect-carefully # ============================================================================ # ============================================================================ # Virtual hosts # Source : conf/extra/httpd-vhosts.conf # ============================================================================ # # # # If you want to maintain multiple domains/hostnames on your # # machine you can setup VirtualHost containers for them. Most configurations # # use only name-based virtual hosts so the server doesn't need to worry about # # IP addresses. This is indicated by the asterisks in the directives below. # # # # Please see the documentation at # # # # for further details before you try to setup virtual hosts. # # # # You may use the command line option '-S' to verify your virtual host # # configuration. # # # # # VirtualHost example: # # Almost any Apache directive may go into a VirtualHost container. # # The first VirtualHost section is used for all requests that do not # # match a ServerName or ServerAlias in any block. # # # # ServerAdmin webmaster@dummy-host.127.0.0.1 # DocumentRoot "C:/Program Files/EasyPHP-12.1/apache/docs/dummy-host.127.0.0.1" # ServerName dummy-host.127.0.0.1 # ServerAlias www.dummy-host.127.0.0.1 # ErrorLog "logs/dummy-host.127.0.0.1-error.log" # CustomLog "logs/dummy-host.127.0.0.1-access.log" common # # # # ServerAdmin webmaster@dummy-host2.127.0.0.1 # DocumentRoot "C:/Program Files/EasyPHP-12.1/apache/docs/dummy-host2.127.0.0.1" # ServerName dummy-host2.127.0.0.1 # ErrorLog "logs/dummy-host2.127.0.0.1-error.log" # CustomLog "logs/dummy-host2.127.0.0.1-access.log" common # # ============================================================================ # ============================================================================ # Secure (SSL/TLS) connections # Source : conf/extra/httpd-ssl.conf # ============================================================================ # # # # This is the Apache server configuration file providing SSL support. # # It contains the configuration directives to instruct the server how to # # serve pages over an https connection. For detailed information about these # # directives see # # # # Do NOT simply read the instructions in here without understanding # # what they do. They're here only as hints or reminders. If you are unsure # # consult the online docs. You have been warned. # # # # Required modules: mod_log_config, mod_setenvif, mod_ssl, # # socache_shmcb_module (for default value of SSLSessionCache) # # # # # Pseudo Random Number Generator (PRNG): # # Configure one or more sources to seed the PRNG of the SSL library. # # The seed data should be of good random quality. # # WARNING! On some platforms /dev/random blocks if not enough entropy # # is available. This means you then cannot use the /dev/random device # # because it would lead to very long connection times (as long as # # it requires to make more entropy available). But usually those # # platforms additionally provide a /dev/urandom device which doesn't # # block. So, if available, use this one instead. Read the mod_ssl User # # Manual for more details. # # # #SSLRandomSeed startup file:/dev/random 512 # #SSLRandomSeed startup file:/dev/urandom 512 # #SSLRandomSeed connect file:/dev/random 512 # #SSLRandomSeed connect file:/dev/urandom 512 # # # # # # When we also provide SSL we have to listen to the # # standard HTTP port (see above) and to the HTTPS port # # # # Note: Configurations that use IPv6 but not IPv4-mapped addresses need two # # Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443" # # # Listen 443 # # ## # ## SSL Global Context # ## # ## All SSL configuration in this context applies both to # ## the main server and all SSL-enabled virtual hosts. # ## # # # SSL Cipher Suite: # # List the ciphers that the client is permitted to negotiate. # # See the mod_ssl documentation for a complete list. # SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5 # # # Speed-optimized SSL Cipher configuration: # # If speed is your main concern (on busy HTTPS servers e.g.), # # you might want to force clients to specific, performance # # optimized ciphers. In this case, prepend those ciphers # # to the SSLCipherSuite list, and enable SSLHonorCipherOrder. # # Caveat: by giving precedence to RC4-SHA and AES128-SHA # # (as in the example below), most connections will no longer # # have perfect forward secrecy - if the server's key is # # compromised, captures of past or future traffic must be # # considered compromised, too. # #SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5 # #SSLHonorCipherOrder on # # # Pass Phrase Dialog: # # Configure the pass phrase gathering process. # # The filtering dialog program (`builtin' is an internal # # terminal dialog) has to provide the pass phrase on stdout. # SSLPassPhraseDialog builtin # # # Inter-Process Session Cache: # # Configure the SSL Session Cache: First the mechanism # # to use and second the expiring timeout (in seconds). # #SSLSessionCache "dbm:C:/Program Files/EasyPHP-12.1/apache/logs/ssl_scache" # SSLSessionCache "shmcb:C:/Program Files/EasyPHP-12.1/apache/logs/ssl_scache(512000)" # SSLSessionCacheTimeout 300 # # ## # ## SSL Virtual Host Context # ## # # # # # General setup for the virtual host # DocumentRoot "C:/Program Files/EasyPHP-12.1/www" # ServerName 127.0.0.1:443 # ServerAdmin admin@127.0.0.1 # ErrorLog "C:/Program Files/EasyPHP-12.1/apache/logs/error.log" # TransferLog "C:/Program Files/EasyPHP-12.1/apache/logs/access.log" # # # SSL Engine Switch: # # Enable/Disable SSL for this virtual host. # SSLEngine on # # # Server Certificate: # # Point SSLCertificateFile at a PEM encoded certificate. If # # the certificate is encrypted, then you will be prompted for a # # pass phrase. Note that a kill -HUP will prompt again. Keep # # in mind that if you have both an RSA and a DSA certificate you # # can configure both in parallel (to also allow the use of DSA # # ciphers, etc.) # # Some ECC cipher suites (http://www.ietf.org/rfc/rfc4492.txt) # # require an ECC certificate which can also be configured in # # parallel. # SSLCertificateFile "C:/Program Files/EasyPHP-12.1/apache/conf/server.crt" # #SSLCertificateFile "C:/Program Files/EasyPHP-12.1/apache/conf/server-dsa.crt" # #SSLCertificateFile "C:/Program Files/EasyPHP-12.1/apache/conf/server-ecc.crt" # # # Server Private Key: # # If the key is not combined with the certificate, use this # # directive to point at the key file. Keep in mind that if # # you've both a RSA and a DSA private key you can configure # # both in parallel (to also allow the use of DSA ciphers, etc.) # # ECC keys, when in use, can also be configured in parallel # SSLCertificateKeyFile "C:/Program Files/EasyPHP-12.1/apache/conf/server.key" # #SSLCertificateKeyFile "C:/Program Files/EasyPHP-12.1/apache/conf/server-dsa.key" # #SSLCertificateKeyFile "C:/Program Files/EasyPHP-12.1/apache/conf/server-ecc.key" # # # Server Certificate Chain: # # Point SSLCertificateChainFile at a file containing the # # concatenation of PEM encoded CA certificates which form the # # certificate chain for the server certificate. Alternatively # # the referenced file can be the same as SSLCertificateFile # # when the CA certificates are directly appended to the server # # certificate for convenience. # #SSLCertificateChainFile "C:/Program Files/EasyPHP-12.1/apache/conf/server-ca.crt" # # # Certificate Authority (CA): # # Set the CA certificate verification path where to find CA # # certificates for client authentication or alternatively one # # huge file containing all of them (file must be PEM encoded) # # Note: Inside SSLCACertificatePath you need hash symlinks # # to point to the certificate files. Use the provided # # Makefile to update the hash symlinks after changes. # #SSLCACertificatePath "C:/Program Files/EasyPHP-12.1/apache/conf/ssl.crt" # #SSLCACertificateFile "C:/Program Files/EasyPHP-12.1/apache/conf/ssl.crt/ca-bundle.crt" # # # Certificate Revocation Lists (CRL): # # Set the CA revocation path where to find CA CRLs for client # # authentication or alternatively one huge file containing all # # of them (file must be PEM encoded). # # The CRL checking mode needs to be configured explicitly # # through SSLCARevocationCheck (defaults to "none" otherwise). # # Note: Inside SSLCARevocationPath you need hash symlinks # # to point to the certificate files. Use the provided # # Makefile to update the hash symlinks after changes. # #SSLCARevocationPath "C:/Program Files/EasyPHP-12.1/apache/conf/ssl.crl" # #SSLCARevocationFile "C:/Program Files/EasyPHP-12.1/apache/conf/ssl.crl/ca-bundle.crl" # #SSLCARevocationCheck chain # # # Client Authentication (Type): # # Client certificate verification type and depth. Types are # # none, optional, require and optional_no_ca. Depth is a # # number which specifies how deeply to verify the certificate # # issuer chain before deciding the certificate is not valid. # #SSLVerifyClient require # #SSLVerifyDepth 10 # # # Access Control: # # With SSLRequire you can do per-directory access control based # # on arbitrary complex boolean expressions containing server # # variable checks and other lookup directives. The syntax is a # # mixture between C and Perl. See the mod_ssl documentation # # for more details. # # # #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \ # # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ # # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ # # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \ # # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \ # # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/ # # # # # SSL Engine Options: # # Set various options for the SSL engine. # # o FakeBasicAuth: # # Translate the client X.509 into a Basic Authorisation. This means that # # the standard Auth/DBMAuth methods can be used for access control. The # # user name is the `one line' version of the client's X.509 certificate. # # Note that no password is obtained from the user. Every entry in the user # # file needs this password: `xxj31ZMTZzkVA'. # # o ExportCertData: # # This exports two additional environment variables: SSL_CLIENT_CERT and # # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the # # server (always existing) and the client (only existing when client # # authentication is used). This can be used to import the certificates # # into CGI scripts. # # o StdEnvVars: # # This exports the standard SSL/TLS related `SSL_*' environment variables. # # Per default this exportation is switched off for performance reasons, # # because the extraction step is an expensive operation and is usually # # useless for serving static content. So one usually enables the # # exportation for CGI and SSI requests only. # # o StrictRequire: # # This denies access when "SSLRequireSSL" or "SSLRequire" applied even # # under a "Satisfy any" situation, i.e. when it applies access is denied # # and no other module can change it. # # o OptRenegotiate: # # This enables optimized SSL connection renegotiation handling when SSL # # directives are used in per-directory context. # #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire # # SSLOptions +StdEnvVars # # # SSLOptions +StdEnvVars # # # # SSL Protocol Adjustments: # # The safe and default but still SSL/TLS standard compliant shutdown # # approach is that mod_ssl sends the close notify alert but doesn't wait for # # the close notify alert from client. When you need a different shutdown # # approach you can use one of the following variables: # # o ssl-unclean-shutdown: # # This forces an unclean shutdown when the connection is closed, i.e. no # # SSL close notify alert is sent or allowed to be received. This violates # # the SSL/TLS standard but is needed for some brain-dead browsers. Use # # this when you receive I/O errors because of the standard approach where # # mod_ssl sends the close notify alert. # # o ssl-accurate-shutdown: # # This forces an accurate shutdown when the connection is closed, i.e. a # # SSL close notify alert is send and mod_ssl waits for the close notify # # alert of the client. This is 100% SSL/TLS standard compliant, but in # # practice often causes hanging connections with brain-dead browsers. Use # # this only for browsers where you know that their SSL implementation # # works correctly. # # Notice: Most problems of broken clients are also related to the HTTP # # keep-alive facility, so you usually additionally want to disable # # keep-alive for those clients, too. Use variable "nokeepalive" for this. # # Similarly, one has to force some clients to use HTTP/1.0 to workaround # # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and # # "force-response-1.0" for this. # BrowserMatch "MSIE [2-5]" \ # nokeepalive ssl-unclean-shutdown \ # downgrade-1.0 force-response-1.0 # # # Per-Server Logging: # # The home of a custom SSL log file. Use this when you want a # # compact non-error SSL logfile on a virtual host basis. # CustomLog "C:/Program Files/EasyPHP-12.1/apache/logs/ssl_request.log" \ # "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" # # # # Note: The following must must be present to support # # starting without SSL on platforms with no /dev/random equivalent # # but a statically compiled-in mod_ssl. # # # # SSLRandomSeed startup builtin # SSLRandomSeed connect builtin # # ============================================================================ # Supplemental configuration # # The configuration files in the conf/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary. # Server-pool management (MPM specific) #Include conf/extra/httpd-mpm.conf # Language settings #Include conf/extra/httpd-languages.conf # User home directories #Include conf/extra/httpd-userdir.conf # Real-time info on requests and configuration #Include conf/extra/httpd-info.conf # Various default settings #Include conf/extra/httpd-default.conf # Configure mod_proxy_html to understand HTML4/XHTML1 Include conf/extra/proxy-html.conf # ============================================================================ # PHP Timezone php_value date.timezone "Europe/Paris" # ============================================================================ # == !!! DO NOT REMOVE !!! =================================================== ### Alias EasyPHP # ============================================================================ #alias #alias # ============================================================================ ### Alias End # ============================================================================